Makita Cordless Impact Driver 40Vmax XGT™ Li-ion [KIT] TD003GA201

Features:
• 40Vmax XGT BL Cordless T-Mode 210 N·m (1,860 in.lbs.) Impact Driver
• Combination of sufficient fastening performance and high cost-competitiveness achieved by carefully selecting the functions
• Aluminum hammer case + Black bumper
“• Simple impact power selection:
∙ 4 modes (Max/ Hard/ Medium/ Soft for bolt)
∙ 1 T-mode (for thin metal only)”
“Max fastening torque: 210 N·m
• Despite increased cost-competitiveness, the max fastening torque is close to that of TD001G, the flagship model of our XGT Impact drivers
• Extended overall length ensures sufficient performance of hammer, enabling to outperform TD001G in heavy-duty operation”
“Light mode
• To turn on the light, set F/R change lever in the neutral position, then pull the switch trigger. To turn off the light, pull the switch trigger again
• The light turns off automatically one hour after turned on”
• One LED job light each on both sides with pre-glow and after-glow functions
• Excellent performance in continuous heavy-duty operation
• High power 40Vmax XGT Li-Ion battery reduces the current load on the controller, allowing for continuous heavy-duty operation
• Constant speed control allows to operate the tool at the same speed as that at which you operate the tool on a full charged battery, even when the remaining battery capacity becomes low
“One-touch bit installation
• Smoother installation of the bit has been achieved by reducing the resistance against insertion of the bit
• By increasing the load of sleeve holding spring, we have reduced the chance of unexpected falling off of the bit”
• Anti-bit wobbling structure
• BL motor is electronically controlled to optimize battery energy use for longer run time per charge
• BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
• BL motor efficiently uses energy to match torque and RPM to the changing demands of the application
• Variable speed control by trigger for precise fastening in a wide variety of applications
• Ergonomically designed handle with rubberized soft grip for increased comfort
• Reversing switch is conveniently located
• Durable, reversible belt clip convenient for temporary tool hanging
• Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
“•Electric brake for maximum productivity
-Trigger lock function
-Anti-restart function
-Overload protection (fuse)
-A-mode (Assist mode)
-Tool-less bit change
-Automatic impact stop system (Available in T-mode which is for driving self-drilling screw in thin metal only)
-Battery protection circuit protects against overloading, over-discharging and over-heating”

Standard Equipments:
Hook, Connector plastic case, Battery (2), Phillips bit, Inner tray

Specifications:
Capacity: machine screw: m4 – m8 (5/32 – 5/16″)
Standard bolt: m5 – m16 (3/16 – 5/8″)
High strength bolt: m5 – m14 (3/16 – 9/16″)
Coarse thread (in length): 22 – 125 mm (7/8 – 4-7/8″)
Steel: 22 mm (7/8″)
Wood (auger bit): 24 mm (15/16″)
Wood (self-feed bit): n/a mm (n/a”)
Masonry drill diameter: n/a mm (n/a”)
Hole saw diameter: 38 mm (1-1/2″)
Shank/drive: hex shank 6.35 mm (1/4″)
No load speed (rpm): max / hard / med. / soft / t mode: 0 – 3,700 / 0 – 3,200 / 0 – 2,100 / 0 – 1,100 / 0 – 2,400
Impacts per minute (ipm): max / hard / med. / soft / t mode: 0 – 4,100 / 0 – 3,600 / 0 – 2,600 / 0 – 1,400 / n/a
Fastening torque: hard / med. / soft: 170 / 50 / 20 n·m (1,510 / 440 / 180 in.Lbs.)
Max fastening torque: 210 n·m (1,860 in.Lbs.)
Max output: 520 w
Vibration level: impact tightening of fasteners of the maximum capacity of the tool: 11.9 m/s²
Vibration k factor: impact tightening of fasteners of the maximum capacity of the tool: 1.5 m/s²
Sound pressure level: 95 db(a)
Sound power level: 106 db(a)
Noise k factor: 3 db(a)
Dimensions (l x w x h): w/o battery: 121 x 86 x 195 mm (4-3/4 x 3-3/8 x 7-5/8″)
W/ bl4020 / bl4025: 121 x 86 x 245 mm (4-3/4 x 3-3/8 x 9-5/8″)
W/ bl4040: 121 x 86 x 252 mm (4-3/4 x 3-3/8 x 9-7/8″)
W/ bl4050f: 121 x 86 x 274 mm (4-3/4 x 3-3/8 x 10-3/4″)
W/ bl4080f: 121 x 86 x 293 mm (4-3/4 x 3-3/8 x 11-1/2″)
Net weight: 1.7 – 2.9 kg (3.7 – 6.4 lbs.)